Engine Parts - Miscellaneous

Revheads offer a large range of after-market performance parts and accessories to allow you to add that distinctive addition to personalise your vehicle and make it stand out from the crowd. The cost of the items shown below includes GST but does not include postage and handling.

P: (07) 3891 5566 / 1800 634 788 (outside Brisbane) - M: 0409 005 183

Item No.	Description	Cost
7091	Weiand Blower Extension Drive Off timing case cover drive	$248.00

RAC16	Rocker Arm Oil Clips - new To suit Ford Harbor Industries brand.	$48.65

MO71550	Moroso Fastener Mounting Brackets - new Set of 2	$89.95

507-57	Isky Valve Retainer - new Set of 8 Moly 11/32"	$59.85

IVS1132	Isky Teflon Valve Seals - new Set of 12 Moly 11/32"	$59.65

R38	Rocket Teflon Valve Seals - new Set of 12 3/8"	$56.85

237	Aluminium Filler Cap Weld in, full bore	$79.65

3500	Moroso Moly Assembly Paste	$46.85

25GBR	Blue Bearing Paste High colour marking aid to locate high clearance spots	$19.85

PL393	Posi Nuts To suit V8 7/16" Set of 16	$98.65

COC97	Fuel Cooler - new Large Click on image to enlarge	$635.00

COC98	Fuel Cooler - new Small Click on image to enlarge	$585.00

2039	Pro Street Stud Girdle Adjustable Nuts Set of 16 Click on image to enlarge	$139.85

50-1843	Speco Posi-Locks 7/16” - set of 16 Click on image to enlarge	$198.65

YT1858	Yella Terra Posi-Nuts 3/8" unf with screws - set of 16	$158.85

M071550	Moroso Fastener Mounting Brackets Zuse clips - 2nd half of self ejecting kit. Weld to steel member of car Click on image to enlarge	$68.65

99820	Crane Valve Stem Seals Teflon - set of 16 Click on image to enlarge	$86.50

P4070	Carter Fuel Pump - new Click on image to enlarge	$245.00

D1586A	Repco Pistons 2686 & Rings To suit Datsun 160 flat top Click on image to enlarge	$95.00

50-1977	Speco Valve Spring Set To suit Holden 6 cylinder Red 149-202	$95.00

PR779	Chrome Moly Push Rod 9.504" x 5/16" - one only	$38.65

WELSH	Brass Welsh Plugs Easily installed, should be with every engine rebuild preferable whilst the engine is out as usually there is 1 at the rear behind the flywheel, which can be awkward to do if the engine is installed. The best way is with a cold chisel and hammer, puncture the old one and just lever out - when installing the new ones ensure that you use a sealant - use a non Harding goo or stag. The cost varies on the exact number of plugs in the individual engine kits or individual sizes and are available seperately.	$4.50

GS-16	Fuel Miser Gasket Material 40" x 18" x 0.050" thick	$18.85